UG630 Series Fuji Human Machine Interface Specification 15 inch:
General specifications | |||
Item | UG630 | ||
UG630H-XH1 | UG630H-XH4 | ||
Power supply | Rated voltage | AC power supply | DC power supply |
100-240VAC | 24VDC | ||
Permissible range of voltage | 100-240VAC±10% | 24VDC±10% | |
Permissible momentary power failure | Within 20ms | Within 1ms | |
Power consumption | 90VA or less | 40W or less | |
Inrush current | For 100VAC: 15A, 10ms or less | 16A, 1ms or less | |
For 200VAC: 30A, 10ms or less | |||
Withstand voltage | AC external terminals to FG: 1500VAC, 1 minute | DC external terminals to FG: 500VAC, 1 minute | |
Physical environment | Ambient temperature | 0°C to +40°C | |
Storage ambient | -10°C to +50°C | ||
temperature Ambient | 85% RH or less (Avoid condensation) | ||
Solvent resistance | No cutting oil or organic solvent clung to the unit | ||
Atmosphere | No corrosive gas or conductive dust | ||
Operating altitude | Altitude 2000m or less | ||
Mechanical operating conditions | Vibration | Vibration frequency: 10 to 150Hz, Acceleration: 9.8m/s2 (1G) | |
resistance | One-way deflection: 0.075mm, X, Y, Z: 3 directions for one hour | ||
Shock | Pulse shape: half sine wave | ||
resistance | Peak acceleration: 147m/s2 (15G), X, Y, Z: each ±3 directions, six times each | ||
Electrical operating conditions | Noise immunity | Noise voltage: 1500Vp-p (pulse width 1μs, rise time: 1ns) Measured using a noise simulator |
Noise voltage: 1000Vp-p (pulse width 1μs, rise time: 1ns) Measured using a noise simulator The DC power model shall also satisfy the EMC standard. |
Anti-static electricity discharge | Conforming to IEC61000-4-2, contact: 6kV, air: 8kV | ||
Mounting conditions | Grounding | Class-D grounding | |
Structure | Degree of protection: front panel: IP65 (using waterproof gasket) rear case: IP20 Form: in a single body Mounting method: panel flush mounting |
Although the UG series has high environmental resistance characteristics equivalent to IP65F, it is expressed as IP65 herein in order to avoid confusion, as measures are required to meet the long-hour oil resistance, which is higher than the IP standard. | |
Cooling system | Natural cooling | ||
Material | Alminum | ||
Mass (kg) | UG630H-XH1: Approx. 5.2, | UG630H-XH4: Approx. 5.0 | |
Display specifications | |||
Item | UG630 | ||
Display device | TFT color LCD | ||
Display size | 15.0-inch | ||
Display colors | 32,768 colors | ||
Resolution W x H (dots) | 1024×768 | ||
Dot pitch W x H (mm) | 0.297×0.297 | ||
Brightness (cd/m2) | 350 | ||
Contrast ratio | 450:01:00 | ||
Angle of vertical visibility | 50.-60 | ||
Angle of horizontal visibility | ±75 | ||
Backlight | Cold cathode tube | ||
Backlight life (average life of a tube)*1 | 60,000h (condition: 25°C) | ||
Auto OFF function | Always ON, arbitrary setting | ||
Brightness adjustment | 128 levels*2 | ||
Surface sheet | Material: Polycarbonate, 0.3mm thick | ||
POWER lamp | Lights in the normal state. Blinks on detection of an inverter error (such as turning off of the backlight). |
*1 At the time when the surface brightness is down to 50% of the initial value at normal temperature of 25°C.
*2 Adjustment by a function switch or macrocommand.
Sản phẩm liên quan
Hãy chọn các phiên bản muốn mua
Xem thêm